The purpose of the dough preparation, preparation of fluffy (dough) and non-fibrous components (additives) is to mix them and mix uniformly. This mixture is ready to enter the paper making process. For this purpose, the following operations are performed in this section. Preparation of fibers in paper making. The first step in the production of paper is the separation of fibers from their main bedding and the dispersion of fibers in the preparation of dough from recycled materials. the process is pulping, which has two main methods:
Complete paper making machine
A wide range of modern machines in the cellulose industries around the world are working, and each one of them, after some time, is pulled out of the production cycle. Reasons for leaving such machines are largely excluded from the production cycle due to economic policies or environmental issues, economic uncertainty, material outcomes, or economic policies governing society. Often in Europe, due to current policies, such machines are abundantly available and, despite the fact that they have not lost their value, their prices are much lower than the new machine.
Our very good connections around the world, especially in Europe, make it possible to introduce a wide range of used machines that are very economical.
Machine Lines:
Machines such as Pop Rails, winder, Rewinder, which play a very important role in completing the production process at the end of the paper and cardboard lines. There are equipment that can produce the output in a standardized manner with different capacities for transferring to the warehouse or for another part of the plant. The different design structures and capacities and the different performance of each of these machines can play a significant role in optimizing and facilitating production and reducing costs. Therefore, it is important to examine the performance of these machines in the light of the technologies used in it.
In this regard, in order to facilitate your access to these technologies, we are pleased to work with reputable European companies and take you on a few steps towards your goals.
Machines for the conversion of paper and paperboard
Paper is often used as an Mediator product for a variety of uses. Various use of paper requires special machines such as Sheet Cutter, Catting, Laminate, Crogit, Printing and Packaging. The different design structures and capacities and the different performance of each of these machines can play a significant role in optimizing and facilitating production and reducing costs. A wide range of these machines are produced and used throughout the world. The performance of these machines is of great importance to the technology used.
Our very good connections in other parts of the world, especially in Europe, make it possible to introduce a wide range of transformational machines that are very economical.
(Water Treatment and Waste) A Great Challenge
Arman Asak maintains that the preservation of water resources is one of the major challenges facing cellulosic industries, so we are working to overcome this problem with the largest and most prestigious European companies with an emphasis on paper industry.
Arman Asak offers its services with an emphasis on paper industry:
Definition of wastewater treatment and advanced wastewater treatment. Optimization, water cycle, domestic preventive measures, specialized protection, environmental and risk analysis, sewage discharge costs and applications, environmental management systems
Wastewater treatment departments:
Various studies, the concept of improvement, the concept of design, the evaluation of proposals, the evaluation of the concept of implementation, assessment of available capacity with regard to the planned changes in the components of the pulp section or increased production capacity. Evaluating new practices, taking into account their suitability for work, applied security and expected practical costs.
Internal water cycles:
A program of research, evaluation, and technical transfer to reduce water consumption by specific methods without damaging production or quality. The discussion of internal productivity and methods for preventing energy losses. Key numbers estimation and the complete reconstruction of engineering programs, the development of concepts for the full reversal of cycles with specialized economic comparisons, internal and external refining concepts for recycled water, prediction of changes in water cycle and wastewater quality at the time. Implementation of internal wastewater treatment methods.
The implementation of these programs will take account of cost savings and the use of superior technologies, based on the experiences of European professionals who have successfully implemented international projects for many years to come. We have expanded our knowledge of the problems and problems in the field of water and wastewater treatment, and its long-term benefits.
Our water-saving technology is an exclusive process for closing circuits. We can reduce the amount of clean, waste water and waste water, and even completely shut off the closed water circuits, and thus utilize water supply technology. Saves energy and energy more than before.
laboratory equipment
Quality control for production units and innovation to produce new and quality products is the main driver of development for each production unit. The existence of a laboratory in a production unit as an operational and exploration unit, creator, innovator, and generator plays an important role in Quantitative and qualitative improvement of products. The presence of a laboratory in a production unit, with committed, qualified scientists and equipment, is the best environment for achieving scientific and realistic methods to improve the quality of products. A laboratory equipped with paper and cardboard units is an essential requirement, and precise control over manufactured products results in lower costs for all sectors. On the other hand, it increases production capacity and guarantees the sale of products.
Chemical Additives
In general, the use of various chemical additives in the paper production process In order to achieve better dough, the further dispersion of cellulose collisions, especially in recycled pulp, is necessary in order to decompose waste paper. The purpose of their application, which is mainly added to the pulping machine, is to help the separation of composite and adhesive materials from the fibers and to prepare them for complete separation and disposal from the pulp liquid at the floatation stage. The use of these materials, especially in the mass production scale, requires a thorough understanding of these additives and in such a way as to maximize the effectiveness of achieving a quality product. Hence, the achievement of the type and manner in which materials and their composition are used in such a way that the costs of consuming chemicals are minimized from the most important uses of chemical substances in paper production.
Our international communications have made many companies that offer laboratory equipment and manufacturers of chemical additives across Europe to declare their willingness to supply laboratory equipment and chemical additives specifically to the cellulosic industry. In this way, we have shortened the way to reach your goal.
We are glad to consult with you about your needs.
We are happy to answer you.